Motorola V710
How to convert Radio Shack "FutureDial" Cable to standard Motorola cable...
Ok here is what you do...
Get something very sharp and chop off the black box by cutting on both sides of it.
Now you will see a shatload of silver wires, the do nothing so cut off quite a bit of the rubber and pull those ×××× wires back. Do this on both sides.
You should see some silver foil. Unwrap this on both sides and you should see a lot of wires on the side that plugs into your phone and four wires on the USB part (red, white, black, and green).
Now you need to strip all of the wires on the USB side of your cable.
USB pin 1 (red) - v600 pin 6 (Purple)
USB pin 2 (white) - v600 pin 5 (Grey)
USB pin 3 (green) - v600 pin 4 (Blue)
USB pin 4 (black) - v600 pin 1 (Brown)
(don't strip the whole wire, just enough t...
(continues)
Get something very sharp and chop off the black box by cutting on both sides of it.
Now you will see a shatload of silver wires, the do nothing so cut off quite a bit of the rubber and pull those ×××× wires back. Do this on both sides.
You should see some silver foil. Unwrap this on both sides and you should see a lot of wires on the side that plugs into your phone and four wires on the USB part (red, white, black, and green).
Now you need to strip all of the wires on the USB side of your cable.
USB pin 1 (red) - v600 pin 6 (Purple)
USB pin 2 (white) - v600 pin 5 (Grey)
USB pin 3 (green) - v600 pin 4 (Blue)
USB pin 4 (black) - v600 pin 1 (Brown)
(don't strip the whole wire, just enough t...
(continues)
...
