Motorola V710
Handsfree Bluetooth Profile
Am I correct in my assumption that the 710 does NOT support this profile?
I am getting ready to pait my new BT250 and I swear I remember reading somewhere that this profile is not supported on the 710.
Thanks,
Squid
I am getting ready to pait my new BT250 and I swear I remember reading somewhere that this profile is not supported on the 710.
Thanks,
Squid
...
Here's a link to the V710 Bluetooth listing:
http://qualweb.bluetooth.org/Template2.cfm?LinkQuali ... »
V710 supports headset, handsfree, and dial-up networking.
This is the "official" site where you can check what profiles are supported for any Bluetooth device you can buy.
http://qualweb.bluetooth.org/Template2.cfm?LinkQuali ... »
V710 supports headset, handsfree, and dial-up networking.
This is the "official" site where you can check what profiles are supported for any Bluetooth device you can buy.
...
The 710 supports both headset and handsfree, and either profile pairs with the Jabra BT250.
To specify handsfree profile pairing you hold down the volume up and phone buttons for 8 sec. until the blue light is on solid. Then on the 710 go to Menu->Settings->Connection->Bluetooth Link->Handsfree and select Yes to temporarily power on; then select Look for Devices.
The Jabra manual discusses the extra features available with the handsfree profile.
To specify handsfree profile pairing you hold down the volume up and phone buttons for 8 sec. until the blue light is on solid. Then on the 710 go to Menu->Settings->Connection->Bluetooth Link->Handsfree and select Yes to temporarily power on; then select Look for Devices.
The Jabra manual discusses the extra features available with the handsfree profile.
...
My BT200 says the same thing about pairing in handsfree mode, and I when I do it none of the "extra" features work. Have you gotten these things to work?
...
From the 250 Manual, here are the additional features available with the handsfree profile:
Last number redial (when not on a call)
While the headset is on, press and hold until you hear 2 short beeps,
release immediately.
Ӣ Rejecting an incoming call (when not on a call)
When your phone rings, press and hold until you hear 2 short beeps,
release immediately.
Ӣ Call-waiting (swapping between 2 calls)
When your phone notifies you of another incoming call while you’re on a call,
press and hold until you hear 2 short beeps, release immediately.
Ӣ Putting a call on hold
While you’re on a call, press and hold until you hear 2 short beeps, release
immediately. Repeat to retrieve the call.
Last number redial (when not on a call)
While the headset is on, press and hold until you hear 2 short beeps,
release immediately.
Ӣ Rejecting an incoming call (when not on a call)
When your phone rings, press and hold until you hear 2 short beeps,
release immediately.
Ӣ Call-waiting (swapping between 2 calls)
When your phone notifies you of another incoming call while you’re on a call,
press and hold until you hear 2 short beeps, release immediately.
Ӣ Putting a call on hold
While you’re on a call, press and hold until you hear 2 short beeps, release
immediately. Repeat to retrieve the call.
...
haus said:
My BT200 says the same thing about pairing in handsfree mode, and I when I do it none of the "extra" features work. Have you gotten these things to work?
I've only had it for a couple of days, so I haven't tried all of them. But I can say that last number redial works.
...
