LG VX-8100
Cannot get BitPim to recognize phone...
I know there has been many postings about getting Bitpim to work, but none of the suggestions have helped me get Bitpim to recognize my 8100. I have a USB cable for the 7000 (from eforcity on ebay) and I have tried the drivers from LG. The phone is recognized using QSPT, but when I try Bitpim, the phone isn't recognized. I've tried setting the COM port to the suggested port (and all the other ones) - currently COM8. Also tried the unofficial Bitpim for the vx8100.
Nothing has worked - the phone is still not recognized. 😡
What setting should be used in the phone under settings&tools-PC Connection- USB or RS-232C(COM Port)? If the RS-232C is used, what speed? 19200 or 115200 - and should the com port in the computer (under device ...
(continues)
Nothing has worked - the phone is still not recognized. 😡
What setting should be used in the phone under settings&tools-PC Connection- USB or RS-232C(COM Port)? If the RS-232C is used, what speed? 19200 or 115200 - and should the com port in the computer (under device ...
(continues)
...
Did you load the drivers from the VX7000 or the VX8100?
You should be using PC Connection setting on the phone.
Try starting out w/ the lowest data rate at first.
You do not need to set the data rate under the device manager it will adjust itself upon connection.
Lastly, use the Bitpim troubleshooter its under the Help/Support sections of the menu.
You should be using PC Connection setting on the phone.
Try starting out w/ the lowest data rate at first.
You do not need to set the data rate under the device manager it will adjust itself upon connection.
Lastly, use the Bitpim troubleshooter its under the Help/Support sections of the menu.
...
