Motorola RAZR V3c

MPT Set-Up

Dec 15, 2005, 6:36 PM

when i try and set up the phone it won't do the auto set-up, i ran the driver tools and ms setup for the modem but it still won't work, also when i do manual under cdma there is no option to pick razr or v3c do i use something else?
any help is appreciated

...

reply report

BlaznSadlz

Dec 15, 2005, 6:41 PM

also if anyone has the most updated links for the driver tool and mpt please provide, maybe that is the prob. i think mine only did upgrade to v 3.25 thanks

...

reply report

jayson1

Dec 15, 2005, 6:51 PM

Download the most current driver:

http://www.bvrp.com/Customers/Motorola/DriverTool.zip »

UnZip and click on the .exe file to install

Download and install MPT Ver. 3.23

http://evanzhang.com/mpt323.exe »

After installing MPT Ver. 3.23

Launch MPT Ver 3.23 and run live update to: Ver. 3.28 dated: 7/13/2005

============================================= =

==> First download http://www.bvrp.com/Customers/Motorola/Driver Tool.zip

==> Run the tool with the phone not connected.

==> Once the driver tool is done, then connect the phone via USB. Let MS do its thing in recognizing the "modem"

==> Start MPT. Do not plug in you phone until it tells you to (after you select UDB and hit next). Now the pictured phone should be a Ra...
(continues)

...

reply report

BlaznSadlz

Dec 15, 2005, 6:52 PM

thanks jay u r awesome i'll try this step by step

...

reply report

mtort44

Dec 15, 2005, 7:28 PM

hey ive followed these steps to a t numerous times no luck...i get to the point where it hsould detect the razr and nothing happens just sits there and the phone says unauthorized charger any suggestions?